Your home could be suffering from low water pressure due to a variety of reasons. Perhaps you checked the pressure gauge in your water meter, and it could be that a local utility worker accidentally left the control panel down. Or maybe your supply is being shut off without warning, and you’re worried that your family’s water will be unsafe if the supply isn’t re-established soon.
To avoid these types of plumbing problems, the best thing to do is take some time before the problem occurs and thoroughly check all the plumbing fixtures in your home. This way, if low water pressure occurs, you’ll be prepared to address the situation promptly. Here are some of the basic causes of plumbing problems that could cause low pressure in your home.
If you notice a gradual decrease in the pressure at your main water supply lines, the first thing that you should do is confirm that the main valve has been properly re-inserted into the pipe. If necessary, you should also use a maintenance specialist to carefully re-insert the valve. If you suspect that there is a problem with your mainline, then it’s very likely that leaks are causing the low water pressure at one or more of your home’s plumbing fixtures. If your mainline is not the root cause of your problem, there might actually be several leaks in your house. It’s important to find and repair the leaks before you try to fix your low water pressure; this can prevent further damage to your home.
Leaks in the plumbing fixtures in your bathroom can often cause low water pressure to start in your shower head. A common cause for this is clogged drains. To ensure that your shower head isn’t leaking, you should make sure that any clogs are being cleared by a professional Plumber in Duncanville TX. It’s also a good idea to have a good set of drain cleaning tools on hand in case you ever need to use them.
Your kitchen sinks and faucets are another common areas that you might expect to encounter problems with low water pressure. Because they are frequently used, you should make sure that they’re not being blocked by accumulated debris or clogs. Always check your drain and faucet traps after each use to ensure that everything is clear and free from build-up. You should also make sure that your kitchen fixtures are properly maintained; remember, clogs and other issues with your kitchen fixtures are often the root cause of low pressure. Use a plunger regularly to make sure that your plumbing fixtures aren’t clogging up and unclog any drains.
Of course, the bathroom is not the only place where low water pressure can occur. If your hot water supply is suffering from low pressure, you may notice that your shower head is draining significantly slower than normal. To fix this, turn on both the cold and hot water supply to your house, then shut off the water supply to the shower head for a few minutes. This should return your shower head’s pressure to normal, and it will likely start to drain more rapidly afterward. If you’re noticing slower drain speeds, you may need to check your electrical valve between the hot and cold water supplies for leaks.
If you’re experiencing low water pressure in your dishwasher, or in your refrigerator, you probably have a broken or damaged valve. This is one of the most common causes of low pressure, because valves are used to regulate water supply. A worn-out valve will allow water to flow freely but will also close off completely when the pressure drops below a certain point. A damaged valve can be easily fixed by a professional plumbing company, so if you notice it, don’t ignore it – take action right away!
Another problem with low water pressure can be a buildup of mineral deposits within your plumbing fixtures. If you notice a white, chalky, or hard residue buildup inside your hot water tank or your dishwasher, it could be due to mineral build-up. Your hot water tank and dishwasher tap should be regularly tested for mineral buildup using a water test kit; any discoloration in the testing results should be removed, and the water treated if necessary. If your water heater does not appear to have any mineral build-up, and you keep your hot water and dishes well-cleaned, the mineral buildup should dissipate on its own.